chemical process equipment Suppliers in UNITED KINGDOM

LMK 809 Chemical Tank Level Sensor is a plastic submersible liquid level sensor for submerging in a chemical tank and measuring the depth over a range of 0 to 250cm from the nose cone, and sending the corresponding 0-10Vdc signal through the submersible FEP coated cable electrical connection. It has a nose cone to protect the sensor diaphragm is used to measure the liquid height from 0 to 250 centimetres to monitor chemical storage tank contents. The sensor is installed by lowering it into the chemical tank until the nose cone reaches the required measurement point. The measured level is sent using a 0 to 10 volts dc analog output signal through the submersible IP68 sealed FEP coated cable to connected liquid level monitoring instrumentation.

LMK 807 Chemical Tank Liquid Level Sensor has a nose cone to protect the sensor diaphragm and is used to measure the liquid height from 0 to 10 metres to monitor gravity drained or pumped liquid chemical storage tank contents. The sensor is installed by lowering it into the liquid chemical tank until the nose cone reaches the required measurement point. The measured level is sent using a 4 to 20 milliamp current output signal through the submersible IP68 sealed cable to connected chemical liquid level monitoring instrumentation. This version of the LMK 807 sensor has a PVC housing and coated cable plus a ceramic sensing diaphragm which highly resistant to many corrosive liquid chemicals used in gravity drained and pumped tank processes.