chemical process equipment Suppliers in UNITED KINGDOM

Thermoplastic Chemical Mixing Tanks are manufactured in spiral wound thermoplastics such as polypropylene and high density polyethylene and offer significant advantages including a broad range of chemical resistance, coned, sloping or flat base choices, integral mixers and mixer support gantries, all-plastic internal mixer baffles, complete static mixing design facility etc. The offered vessels is up to 4.3m diameter and capacities range up to 100m3. A broad range of valving, pumps and controls is supplied with the mixing vessels to complete the package.

Turbulent Contact Fume Scrubber ensures high removal efficiency combined with smaller tower sizes and has the ability to adapt the unit to changing process conditions. The features are it has a broad range of chemical resistance, it can handle gas volumes up to 80,000 m3/h, it has integral liquor distribution pipework, it has complex internal gas distribution capability and further is provided with completely thermoplastic construction.

Static Packed Fume Scrubber Tower is ideally suited to the normal gas cleaning application with no solids contamination and where process conditions are predictable. Its thermoplastic construction offer many benefits to the customers such as it can handle gas volumes up to 60,000 m³/h, it has integral liquor distribution pipework, it is provided with all-thermoplastic construction limiting internal and external corrosion and further is provided with a broad range of chemical resistance.

Chemical Injection Valves allows the safe injection of chemicals into the process line at full pressure. The probe usually features a 3mm (1/8") hole or spray nozzle allowing the injection to be dispersed into the process evenly. A check valve on the inlet prevents any back flow out of the process stream. The material of construction is CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys. The bore sizes are 1/4” (6mm) to 8” (200mm) and further its temperature (max) is 1000 °F (538 °C).

Gauge Valves include multiport or block and bleed style for pressure gauge isolation, calibration and venting. Metal and soft seat options are available for use in gas or liquid service and rated up to 10,000 psi (690 barg). The material of construction is CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys. Its connections is ¼” to 1” threaded, welded, flanged or compression ended. The pressure (max) is 10,000 psig (690 barg) and the temperature (max) is 1000 °F (538 °C).