chemical process equipment Suppliers in UNITED STATES

Fuel Gas Conditioning Systems is used for superheating the gas will drive temperature above the dewpoint, eliminating condensate in the system.Gas filtration will ensure any other contaminant, whether solids or liquids, will be removed prior to entering the turbine.Fuel Gas Conditioning Systems electric heating provides the best option for super heating as its power is instantly available, has no emissions, and is precisely controlled to only the demand needed.

Carrier conventional fluid beds are designed to dry and/or cool a variety of products without the aid of vibration. Fluid bed processing passes a gas directly through a bed of solid material via a perforated plate, nozzles, or other fluidizing media, thereby lifting and mixing the solids.

Low-Temp. Vacuum Spray Dryer CIT-LSD-LTV800 provide affordable solutions for small-scale spray drying through innovative technology. They are ideal for applications in pharmaceuticals, organic synthesis, ceramic powders, foods and plant extractions. The important specifications are the evaporation rate of water is 800 ml/hour, the air inlet temperature range is 50? -80? , the temperature precision is ± 1? , the air flow rate is 480 L/min and further the dimension is 800 x 600 x 1200 mm.

3D Mixer 1.0L is widely used in applications such as Biotechnology, Chemistry, Materials, Pharmacy, Medicine, Ceramic etc. The specifications are it has digital timer to control mixing time, it has changeable screen to prevent clumping (optional), the material of construction is stainless steel (304) or S316, the speed is 20 RPM which is adjustable as optional and further its dimensions is 50 x 80 x 80 cm.

CR-10GD-TC10 Chemical Reactor is a standard 1.0 L double-wall glass reactor vessel with quick action connectors and bottom discharge valve. It is provided with glass lid, its vacuum is up to 3.5 kPa and further has power stirrer, digital display, and the speed is 0-1200 rpm.

Fluid Bed Dryer is manufactured using 304 Stainless Steel. It has 48" Wide x approximate 135" long 2 zone bed. It has approximate 72" long wedge wire section with (2) screen sections, 3 total separations. It is provided with top clamp down cover with lifting mechanism, top end feed, bottom end discharge. It is driven by a M5H vibrating motor, 1.5hp, 3/60/230/460 volt, 1725 rpm. It includes a water coil and further the equipment is mounted on a carbon steel frame.

Stainless Steel Pressure Vessel has approximately 24" diameter X 24" straight side. The internal rated is 15 PSI /FV @ 360 degrees F. The jacket rated is 15 PSI @ 360 degrees F. It has shell thickness 140. and further has 1" center bottom outlet.

VB Barstock Valves are designed for controlling a broad range of flow rates of liquids and gases, CV™ Utility valves are available in three conveniently overlapping orifice-needle sizes. VB Barstock Valves are offered in straight (T) and 90 degree (L) flow patterns and with 1/8” FNPT inlet and outlet ports. VB Barstock Valve cartridges are also interchangeable with built-in valves of Aalborg’s series of P,T,S and G flow meter product line.

Model F In Line PTFE Flow Meters are made entirely of PTFE, PFA, and PCTFE, the model F flow meter is excellent for high-purity applications or use with corrosive liquids.Model F In Line PTFE Flow Meters are individually tested on a Mass Spectrometer Leak Detector and certified to a leak integrity rating of 1 X 10-7 sccs Helium.

Double Cone Blender provide gentle high-flow mixing for solids/solids blends in a proportion of up to 1:100.000 with the possibility of using an intensifier bar to enhance the mixture, and solids/liquids in powder or granulate form with different specific weights. Due to the characteristic shapes formed by two normally identical sections joined at a specific angle, axial flows are created inside which separate and join the product to be mixed, and which together with the radial action of the mixture, results in a rapid and uniform process without the use of deflecting blades or other mechanical devices. An automatic vacuum loading system can be incorporated, which cuts operating times and avoids the presence of escaped powder in the surrounding areas. Discharge is carried out from an outlet situated at the base of the intersection of the two cylinders, where typically a butterfly valve is fitted with lever control or pneumatic activator.