chemical process equipment Suppliers in UNITED STATES

VB Barstock Valves are designed for controlling a broad range of flow rates of liquids and gases, CV™ Utility valves are available in three conveniently overlapping orifice-needle sizes. VB Barstock Valves are offered in straight (T) and 90 degree (L) flow patterns and with 1/8” FNPT inlet and outlet ports. VB Barstock Valve cartridges are also interchangeable with built-in valves of Aalborg’s series of P,T,S and G flow meter product line.

Model F In Line PTFE Flow Meters are made entirely of PTFE, PFA, and PCTFE, the model F flow meter is excellent for high-purity applications or use with corrosive liquids.Model F In Line PTFE Flow Meters are individually tested on a Mass Spectrometer Leak Detector and certified to a leak integrity rating of 1 X 10-7 sccs Helium.

VT PTFE Needle Valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service.VT PTFE Needle Valves spindles are made of rigid CTFE to minimize the undesirable material “creeping” normally associated with PTFE. PTFE valves are designed for relatively high flow ranges while still performing well in low flow rates. This Valves may be used in pressure or non-critical vacuum service.

Model T Single Flow Tube Meters is a precision instrument embodying the inherent simplicity, versatility and economy of the classical variable area meter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating. It contains chemically inert wetted parts,rib-guided or fluted metering tubes facilitate stable/accurate readings, magnifier lens in front shield to enhance reading resolution,simple means of panel mounting.

Wafer Style Vortex Flow Meters are designed to indicate flow rates of gases, liquids or steam. It is constructed of type 304 or 316 stainless steel, wafers may be installed in-line by customer provided or built-in flanges,key pad or communication interface functionalities include Measuring units, programmable flow alarm, two programmable totalizers, programmable flow rate pulse output, two programmable optically isolated outputs, battery backed real time clock (RTC), digital communication interface (RS-232 or RS-485), programmable diagnostic events log and register with date and time stamp, programmable process variable log with date stamp, calibration and flowing fluid parameters adjustment, extensive diagnostics.

Insertion Vortex Flow Meters indicate volumetric and/or mass flow rates of gases, liquids or steam in piping conduits. Insertion Vortex Flow Meters vortices are alternately shed on each side of the body, 180 degrees out of phase to each other, resulting in an oscillating pressure gradient. It is constructed of type 304 or 316 stainless steel, Vortex meters may be inserted into pipe conduits carrying gases, liquids or steam. Insertion applications facilitate inside diameters from 4” to 12 feet.Aalborg’s proprietary DSP algorithm accurately filters vortex frequency, improving the quality of flow measurements. Its dual sensor signal processing technology improves accuracy at low flows.

Multi-Parameter Vortex Flow Meters are temperature and Pressure compensated in-line Vortex Flow Meters. These are designed to indicate flow rates of gases, liquids or steam.Multi-Parameter Vortex Flow Meters is constructed of type 316 stainless steel, Vortex meters may be installed in-line by customer provided or built-in flanges and key pad or communication interface functionalities include measuring units, programmable flow alarm, two programmable totalizers, programmable flow rate pulse output, two programmable optically isolated outputs, battery backed real time clock (RTC), digital communication interface (RS-232 or RS-485), programmable diagnostic events log and register with date/time stamp, programmable process variable log with date/time stamp, calibration and flowing fluid parameters adjustment, extensive diagnostics.

Model P Single Flow Tube Meters is mainly designed for low flowrates. Model P flowmeter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical variable area meter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating, etc.Model P Single Flow Tube Meters contains rib-guided or fluted metering tubes facilitate stable and accurate readings,simple means of panel mounting and it is chemical compatibility.