Chemical Dryers - drying, curing, calcining, tempering, heating quenching, polymerization, solvent reduction

dryers Suppliers in UNITED STATES

Continuator Indirect Drying System

Continuator Indirect Drying System is a jacketed ribbon blender-type device best suited for additional post-thermal treatment, and batch operations for long reacting or thermal drying cycles. Batch or continuous operations ideal for pre-blending, reacting, volatile removal, and 2nd-stage material heating. It is provided with different rotor configurations, such as paddles or ribbons, available for ideal agitation and handling of material phase changes. The liquid and gas injection points can be incorporated throughout the body for even distribution of additives. Its simple design provides a lower-cost option for thermal treatment.

Bepex International LLC

333 Taft St NE, Minneapolis, MN 55413, USA., Minneapolis, UNITED STATES


Continuator Continuator
Vibrating Fluid Bed Dryers

Carrier vibrating fluid bed dryers are designed to dry and/or cool a variety of products at a wide variation of feed rates. Like conventional fluid bed processors, vibrating fluid bed dryers function by passing a process gas directly through a bed of solids via a perforated plate or another type of fluidizing media. Vibration is added to aid in fluidization of more difficult to fluidize materials.

Carrier Vibrating Equipment, Inc.

P. O. Box 37070 Louisville, KY 40233-7070, USA, , UNITED STATES


Tornesh Dryers

The Tornesh dryer is an innovative drying device combining many of the benefits of fluid bed and flash drying. The unit can process wet solids ranging in size from 1 micron up to 1/2 inch diameter.

Carrier Vibrating Equipment, Inc.

P. O. Box 37070 Louisville, KY 40233-7070, USA, , UNITED STATES


1800 LXA Laboratory Glassware Washer Dryer

1800 LXA Laboratory Glassware Washer Dryer is capable of cleaning a large volume of glassware. Customers can load 6 independent racks on a choice of 8 levels as a result of its innovative design. The Lancer 1800 LXA freestanding glassware washer dryer is typically found in large centralised facilities or in laboratories with large non-standard sized items. Thousands of glassware items a day presents no problem for the 1800 LXA chamber that can wash and dry on 6 levels simultaneously. Racks are interchangeable between any of the 6 levels allowing many loading options. It is also ideal for very large vessels - 20 to 100 litres (5 - 26 gallons). Its application include in Pharmaceuticals, Life Sciences, Biopharm, Food, Chemicals etc.

Lancer Sales USA Inc

1150 Emma Oaks Trail - Ste 140 Lake Mary, FL 32746-7120, USA, Lake Mary, UNITED STATES


1800 1800
Cylindrical Vacuum Dryers

Cylindrical Vacuum Dryers is being used to dry specialty chemicals.Internal agitation consists of an improved paddle design, set at opposing angles, to insure that the materials being dried are continuously exposed to the jacketed surface area of the trough and endplates.

Charles Ross and Son Company

710 Old Willets Path, Hauppauge, New York 11788, USA, New York, UNITED STATES


Nutsche Filter-Dryers

Nutsche Filter-Dryers are known and used world-wide for critical high purity separations of liquids and solids. Products include pharmaceuticals, bio-materials, electronics grade materials, fine specialty chemicals, and many others. The Nutsches are preferred for this separation, a critical operation because it is often the final step in an entire manufacturing process, prior to packaging. In most applications, the solids are the product, often being highly pure crystals from reaction and precipitation, suspended in a solvent slurry. After liquid from the slurry passes through the filter, the solids may be further dried and then harvested.

Pope Scientific, Inc.

351 N. Dekora Woods Blvd. P.O. Box 80018, Saukville, WI 53080, USA, Ozaukee, UNITED STATES


Nutsche Nutsche
Low-Temp. Vacuum Spray Dryer CIT-LSD-LTV800

Low-Temp. Vacuum Spray Dryer CIT-LSD-LTV800 provide affordable solutions for small-scale spray drying through innovative technology. They are ideal for applications in pharmaceuticals, organic synthesis, ceramic powders, foods and plant extractions. The important specifications are the evaporation rate of water is 800 ml/hour, the air inlet temperature range is 50? -80? , the temperature precision is ± 1? , the air flow rate is 480 L/min and further the dimension is 800 x 600 x 1200 mm.

Col-Int Tech

PO Box 2101, Columbia, SC 29202, USA, Columbia, UNITED STATES


Low-Temp. Low-Temp.
Fluid Bed Dryer

Fluid Bed Dryer is manufactured using 304 Stainless Steel. It has 48" Wide x approximate 135" long 2 zone bed. It has approximate 72" long wedge wire section with (2) screen sections, 3 total separations. It is provided with top clamp down cover with lifting mechanism, top end feed, bottom end discharge. It is driven by a M5H vibrating motor, 1.5hp, 3/60/230/460 volt, 1725 rpm. It includes a water coil and further the equipment is mounted on a carbon steel frame.

Phoenix Equipment Corporation

333 Broad Street, Red Bank, NJ 07701 USA, Monmouth, UNITED STATES


DoverPac® Flexible Containment Systems

DoverPac® Flexible Containment Systems include enclosures for almost any process. Use of the ArmorFlex® film and integral gloves and sleeves will support operations from filter dryer discharge and heel removal to tray dryer loading and unloading.

ILC Dover

ILC Dover One Moonwalker Road Frederica, DE (USA), , UNITED STATES


APX® Burner Line Burners

APX® Natural Gas Burners are packaged nozzle mixing line burners designed for fresh or low temperature re-circulated air heating applications. The APX® Industrial Burner is a value engineered design utilizing a single aluminum extrusion for both its air and fuel manifolds. Its single-piece, joint-less body design provides standard straight gas burners up to 40 feet.

Maxon - A Honeywell Company

201 East 18th Street Muncie , IN 47302 USA, , UNITED STATES


12 uses cookies to ensure that we give you the best experience on our website. By using this site, you agree to our Privacy Policy and our Terms of Use. X